This is the latest recevied telemetry packets stored in our database for station/object SP2GPS-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Bat* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1751604219 | 0.45 VDC | 0 VDC | 0 | 0 | 0 |
| 1751603318 | 0.28 VDC | 0 VDC | 0 | 0 | 0 |
| 1751602418 | 0.4 VDC | 0 VDC | 0 | 0 | 0 |
| 1751601517 | 0.28 VDC | 0 VDC | 0 | 0 | 0 |
| 1751600616 | 0.52 VDC | 0 VDC | 0 | 0 | 0 |
| 1751599716 | 0.46 VDC | 0 VDC | 0 | 0 | 0 |
| 1751598815 | 0.28 VDC | 0 VDC | 0 | 0 | 0 |
| 1751597915 | 0.49 VDC | 0 VDC | 0 | 0 | 0 |
| 1751597014 | 0.28 VDC | 0 VDC | 0 | 0 | 0 |
| 1751596113 | 0.43 VDC | 0 VDC | 0 | 0 | 0 |
| 1751595213 | 0.45 VDC | 0 VDC | 0 | 0 | 0 |
| 1751594312 | 0.28 VDC | 0 VDC | 0 | 0 | 0 |
| 1751593411 | 0.42 VDC | 0 VDC | 0 | 0 | 0 |
| 1751592511 | 0.28 VDC | 0 VDC | 0 | 0 | 0 |
| 1751591610 | 0.28 VDC | 0 VDC | 0 | 0 | 0 |
| 1751590710 | 0.49 VDC | 0 VDC | 0 | 0 | 0 |
| 1751589809 | 0.28 VDC | 0 VDC | 0 | 0 | 0 |
| 1751588008 | 0.43 VDC | 0 VDC | 0 | 0 | 0 |
| 1751587107 | 0.28 VDC | 0 VDC | 0 | 0 | 0 |
| 1751585306 | 0.28 VDC | 0 VDC | 0 | 0 | 0 |
| 1751584406 | 0.36 VDC | 0 VDC | 0 | 0 | 0 |
| 1751583505 | 0.52 VDC | 0 VDC | 0 | 0 | 0 |
| 1751582604 | 0.28 VDC | 0 VDC | 0 | 0 | 0 |
| 1751581704 | 0.4 VDC | 0 VDC | 0 | 0 | 0 |
| 1751580803 | 0.41 VDC | 0 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)