This is the latest recevied telemetry packets stored in our database for station/object SQ1JKB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765071293 | 898 Count | 2 Count | 0 Count | 4.06 VDC | 0.14 VDC |
| 1765069490 | 897 Count | 2 Count | 0 Count | 4.11 VDC | 0.14 VDC |
| 1765067687 | 896 Count | 2 Count | 0 Count | 4.1 VDC | 0.14 VDC |
| 1765065885 | 895 Count | 2 Count | 0 Count | 4.13 VDC | 0.14 VDC |
| 1765064082 | 894 Count | 2 Count | 0 Count | 4.07 VDC | 0.14 VDC |
| 1765062279 | 893 Count | 2 Count | 0 Count | 4.08 VDC | 0.14 VDC |
| 1765060476 | 892 Count | 2 Count | 0 Count | 4.09 VDC | 0.14 VDC |
| 1765058673 | 891 Count | 2 Count | 0 Count | 4.14 VDC | 0.14 VDC |
| 1765056870 | 890 Count | 2 Count | 0 Count | 4.11 VDC | 0.14 VDC |
| 1765055102 | 889 Count | 2 Count | 0 Count | 4.11 VDC | 0.14 VDC |
| 1765053299 | 888 Count | 2 Count | 0 Count | 4.1 VDC | 0.14 VDC |
| 1765051496 | 887 Count | 2 Count | 0 Count | 4.14 VDC | 0.14 VDC |
| 1765049693 | 886 Count | 2 Count | 0 Count | 4.06 VDC | 0.14 VDC |
| 1765047890 | 885 Count | 2 Count | 0 Count | 4.07 VDC | 0.14 VDC |
| 1765046088 | 884 Count | 2 Count | 0 Count | 4.06 VDC | 0.14 VDC |
| 1765044285 | 883 Count | 2 Count | 0 Count | 4.12 VDC | 0.14 VDC |
| 1765042482 | 882 Count | 2 Count | 0 Count | 4.08 VDC | 0.14 VDC |
| 1765040679 | 881 Count | 2 Count | 0 Count | 4.14 VDC | 0.14 VDC |
| 1765038876 | 880 Count | 2 Count | 0 Count | 4.11 VDC | 0.14 VDC |
| 1765037073 | 879 Count | 2 Count | 0 Count | 4.1 VDC | 0.14 VDC |
| 1765035271 | 878 Count | 2 Count | 0 Count | 4.11 VDC | 0.14 VDC |
| 1765033501 | 877 Count | 2 Count | 0 Count | 4.09 VDC | 0.14 VDC |
| 1765031698 | 876 Count | 2 Count | 0 Count | 4.12 VDC | 0.14 VDC |
| 1765029895 | 875 Count | 2 Count | 0 Count | 4.11 VDC | 0.14 VDC |
| 1765028093 | 874 Count | 2 Count | 0 Count | 4.07 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)