This is the latest recevied telemetry packets stored in our database for station/object SV2HVB-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | V_Ba4p* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1752445080 | 4.15 VDC | 0 | 0 | 0 | 0 |
1752444177 | 4.15 VDC | 0 | 0 | 0 | 0 |
1752443631 | 4.13 VDC | 0 | 0 | 0 | 0 |
1752443503 | 4.13 VDC | 0 | 0 | 0 | 0 |
1752443472 | 4.15 VDC | 0 | 0 | 0 | 0 |
1752441962 | 4.12 VDC | 0 | 0 | 0 | 0 |
1752441058 | 4.13 VDC | 0 | 0 | 0 | 0 |
1752440155 | 4.13 VDC | 0 | 0 | 0 | 0 |
1752438614 | 4.13 VDC | 0 | 0 | 0 | 0 |
1752436440 | 4.09 VDC | 0 | 0 | 0 | 0 |
1752432568 | 3.98 VDC | 0 | 0 | 0 | 0 |
1752431665 | 3.75 VDC | 0 | 0 | 0 | 0 |
1752430762 | 3.76 VDC | 0 | 0 | 0 | 0 |
1752428053 | 3.75 VDC | 0 | 0 | 0 | 0 |
1752427150 | 3.76 VDC | 0 | 0 | 0 | 0 |
1752426247 | 3.76 VDC | 0 | 0 | 0 | 0 |
1752425344 | 3.75 VDC | 0 | 0 | 0 | 0 |
1752424441 | 3.76 VDC | 0 | 0 | 0 | 0 |
1752423538 | 3.78 VDC | 0 | 0 | 0 | 0 |
1752422635 | 3.76 VDC | 0 | 0 | 0 | 0 |
1752421732 | 3.76 VDC | 0 | 0 | 0 | 0 |
1752420829 | 3.76 VDC | 0 | 0 | 0 | 0 |
1752419926 | 3.77 VDC | 0 | 0 | 0 | 0 |
1752419023 | 3.79 VDC | 0 | 0 | 0 | 0 |
1752418120 | 3.8 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ba4p: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)