This is the latest recevied telemetry packets stored in our database for station/object ED1YBG-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1755510756 | 4.18 VDC | 12.96 VDC | 0 | 0 | 0 |
| 1755509555 | 4.18 VDC | 13 VDC | 0 | 0 | 0 |
| 1755508355 | 4.19 VDC | 11.56 VDC | 0 | 0 | 0 |
| 1755507154 | 4.2 VDC | 11.04 VDC | 0 | 0 | 0 |
| 1755505953 | 4.21 VDC | 10.92 VDC | 0 | 0 | 0 |
| 1755504752 | 4.25 VDC | 10.74 VDC | 0 | 0 | 0 |
| 1755503552 | 4.24 VDC | 10.64 VDC | 0 | 0 | 0 |
| 1755502351 | 4.23 VDC | 10.82 VDC | 0 | 0 | 0 |
| 1755501150 | 4.11 VDC | 10.74 VDC | 0 | 0 | 0 |
| 1755499950 | 4.12 VDC | 10.4 VDC | 0 | 0 | 0 |
| 1755498749 | 4.12 VDC | 10.24 VDC | 0 | 0 | 0 |
| 1755497548 | 4.13 VDC | 10.2 VDC | 0 | 0 | 0 |
| 1755496348 | 4.14 VDC | 10.16 VDC | 0 | 0 | 0 |
| 1755495147 | 4.14 VDC | 10.2 VDC | 0 | 0 | 0 |
| 1755493949 | 4.15 VDC | 10.2 VDC | 0 | 0 | 0 |
| 1755492745 | 4.15 VDC | 10.04 VDC | 0 | 0 | 0 |
| 1755491545 | 4.15 VDC | 10.22 VDC | 0 | 0 | 0 |
| 1755490344 | 4.16 VDC | 10.24 VDC | 0 | 0 | 0 |
| 1755489143 | 4.17 VDC | 10.26 VDC | 0 | 0 | 0 |
| 1755487943 | 4.17 VDC | 10.28 VDC | 0 | 0 | 0 |
| 1755486742 | 4.18 VDC | 10.28 VDC | 0 | 0 | 0 |
| 1755485541 | 4.18 VDC | 10.28 VDC | 0 | 0 | 0 |
| 1755484341 | 4.19 VDC | 10.3 VDC | 0 | 0 | 0 |
| 1755483140 | 4.2 VDC | 10.3 VDC | 0 | 0 | 0 |
| 1755481939 | 4.2 VDC | 10.3 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)