This is the latest recevied telemetry packets stored in our database for station/object G7IEI-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732382368 | 2.88 | 0 | 0 | 0 | 0 |
| 1732381439 | 2.92 | 0 | 0 | 0 | 0 |
| 1732380435 | 2.97 | 0 | 0 | 0 | 0 |
| 1732379522 | 3 | 0 | 0 | 0 | 0 |
| 1732378619 | 3.03 | 0 | 0 | 0 | 0 |
| 1732377706 | 3.05 | 0 | 0 | 0 | 0 |
| 1732376679 | 3.07 | 0 | 0 | 0 | 0 |
| 1732375994 | 3.09 | 0 | 0 | 0 | 0 |
| 1732371921 | 3.2 | 0 | 0 | 0 | 0 |
| 1732371428 | 3.22 | 0 | 0 | 0 | 0 |
| 1732370549 | 3.25 | 0 | 0 | 0 | 0 |
| 1732369921 | 3.26 | 0 | 0 | 0 | 0 |
| 1732368987 | 3.28 | 0 | 0 | 0 | 0 |
| 1732368062 | 3.29 | 0 | 0 | 0 | 0 |
| 1732367621 | 3.31 | 0 | 0 | 0 | 0 |
| 1732367289 | 3.31 | 0 | 0 | 0 | 0 |
| 1732366386 | 3.33 | 0 | 0 | 0 | 0 |
| 1732365397 | 3.34 | 0 | 0 | 0 | 0 |
| 1732364476 | 3.36 | 0 | 0 | 0 | 0 |
| 1732363896 | 3.37 | 0 | 0 | 0 | 0 |
| 1732363296 | 3.37 | 0 | 0 | 0 | 0 |
| 1732361891 | 3.4 | 0 | 0 | 0 | 0 |
| 1732359794 | 3.44 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)