This is the latest recevied telemetry packets stored in our database for station/object OK4JL-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Satellite* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758048665 | 4.31 V | 17 | 0 | 0 | 0 |
| 1758048605 | 4.33 V | 19 | 0 | 0 | 0 |
| 1758048545 | 4.31 V | 17 | 0 | 0 | 0 |
| 1758048485 | 4.33 V | 17 | 0 | 0 | 0 |
| 1758048425 | 4.33 V | 17 | 0 | 0 | 0 |
| 1758048365 | 4.33 V | 15 | 0 | 0 | 0 |
| 1758048305 | 4.33 V | 15 | 0 | 0 | 0 |
| 1758048245 | 4.33 V | 15 | 0 | 0 | 0 |
| 1758048185 | 4.33 V | 17 | 0 | 0 | 0 |
| 1758048125 | 4.33 V | 16 | 0 | 0 | 0 |
| 1758048065 | 4.33 V | 15 | 0 | 0 | 0 |
| 1758048005 | 4.33 V | 16 | 0 | 0 | 0 |
| 1758047945 | 4.33 V | 15 | 0 | 0 | 0 |
| 1758047885 | 4.33 V | 16 | 0 | 0 | 0 |
| 1758047825 | 4.33 V | 17 | 0 | 0 | 0 |
| 1758047765 | 4.34 V | 17 | 0 | 0 | 0 |
| 1758047705 | 4.31 V | 18 | 0 | 0 | 0 |
| 1758047645 | 4.33 V | 15 | 0 | 0 | 0 |
| 1758047585 | 4.33 V | 16 | 0 | 0 | 0 |
| 1758047525 | 4.33 V | 17 | 0 | 0 | 0 |
| 1758047465 | 4.33 V | 17 | 0 | 0 | 0 |
| 1758047405 | 4.33 V | 15 | 0 | 0 | 0 |
| 1758047345 | 4.34 V | 19 | 0 | 0 | 0 |
| 1758047285 | 4.34 V | 17 | 0 | 0 | 0 |
| 1758047225 | 4.37 V | 15 | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0
Satellite: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)