This is the latest recevied telemetry packets stored in our database for station/object EA1FBU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1743716763 | 4.28 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1743715863 | 4.3 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1743714963 | 4.27 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1743714063 | 4.28 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1743713163 | 4.27 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1743712263 | 4.29 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1743711363 | 4.29 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1743710463 | 4.28 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1743709562 | 4.28 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1743708662 | 4.3 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1743707762 | 4.27 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1743706862 | 4.28 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1743705962 | 4.28 VDC | 1.8 VDC | 0 | 0 | 0 |
| 1743705062 | 4.29 VDC | 2.06 VDC | 0 | 0 | 0 |
| 1743704162 | 4.29 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1743703262 | 4.28 VDC | 3.14 VDC | 0 | 0 | 0 |
| 1743702361 | 4.27 VDC | 3.56 VDC | 0 | 0 | 0 |
| 1743701461 | 4.28 VDC | 3.64 VDC | 0 | 0 | 0 |
| 1743700561 | 4.27 VDC | 4.12 VDC | 0 | 0 | 0 |
| 1743699661 | 4.29 VDC | 4.22 VDC | 0 | 0 | 0 |
| 1743698761 | 4.3 VDC | 4.6 VDC | 0 | 0 | 0 |
| 1743697861 | 4.28 VDC | 4.58 VDC | 0 | 0 | 0 |
| 1743696961 | 4.28 VDC | 3.98 VDC | 0 | 0 | 0 |
| 1743696061 | 4.28 VDC | 4.78 VDC | 0 | 0 | 0 |
| 1743695161 | 4.29 VDC | 5.32 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)