This is the latest recevied telemetry packets stored in our database for station/object VK2TBL-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793200557 | 42 Count | 40 Count | 26 Count | 4.25 VDC | 0.14 VDC |
| 1793198754 | 39 Count | 37 Count | 24 Count | 4.26 VDC | 0.14 VDC |
| 1793197025 | 32 Count | 34 Count | 22 Count | 4.27 VDC | 0.14 VDC |
| 1793195222 | 29 Count | 31 Count | 20 Count | 4.26 VDC | 0.14 VDC |
| 1793193419 | 26 Count | 27 Count | 18 Count | 4.27 VDC | 0.14 VDC |
| 1793191615 | 23 Count | 23 Count | 16 Count | 4.28 VDC | 0.14 VDC |
| 1793189812 | 20 Count | 19 Count | 14 Count | 4.3 VDC | 0.14 VDC |
| 1793188009 | 17 Count | 16 Count | 12 Count | 4.3 VDC | 0.14 VDC |
| 1793186206 | 14 Count | 14 Count | 10 Count | 4.29 VDC | 0.14 VDC |
| 1793184402 | 11 Count | 11 Count | 8 Count | 4.23 VDC | 0.14 VDC |
| 1793182599 | 8 Count | 8 Count | 6 Count | 4.29 VDC | 0.14 VDC |
| 1793180796 | 5 Count | 4 Count | 4 Count | 4.28 VDC | 0.14 VDC |
| 1793178993 | 2 Count | 2 Count | 2 Count | 4.29 VDC | 0.14 VDC |
| 1793177190 | 866 Count | 1001 Count | 783 Count | 4.25 VDC | 0.14 VDC |
| 1793175386 | 863 Count | 997 Count | 781 Count | 4.27 VDC | 0.14 VDC |
| 1793173583 | 860 Count | 993 Count | 779 Count | 4.29 VDC | 0.14 VDC |
| 1793171780 | 857 Count | 989 Count | 777 Count | 4.3 VDC | 0.14 VDC |
| 1793169977 | 854 Count | 985 Count | 775 Count | 4.25 VDC | 0.14 VDC |
| 1793168174 | 800 Count | 897 Count | 722 Count | 4.27 VDC | 0.14 VDC |
| 1793166370 | 751 Count | 840 Count | 674 Count | 4.3 VDC | 0.14 VDC |
| 1793164568 | 725 Count | 813 Count | 649 Count | 4.28 VDC | 0.14 VDC |
| 1793162764 | 708 Count | 796 Count | 633 Count | 4.24 VDC | 0.14 VDC |
| 1793160961 | 683 Count | 767 Count | 609 Count | 4.24 VDC | 0.14 VDC |
| 1793159157 | 663 Count | 744 Count | 590 Count | 4.24 VDC | 0.14 VDC |
| 1793157354 | 657 Count | 739 Count | 585 Count | 4.24 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)