This is the latest recevied telemetry packets stored in our database for station/object 9W2GDB-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765678036 | 635 Count | 893 Count | 587 Count | 4.03 VDC | 0.08 VDC |
| 1765676232 | 630 Count | 888 Count | 583 Count | 4.03 VDC | 0.08 VDC |
| 1765674427 | 626 Count | 882 Count | 580 Count | 4.04 VDC | 0.08 VDC |
| 1765660333 | 567 Count | 803 Count | 522 Count | 4.04 VDC | 0.08 VDC |
| 1765658529 | 562 Count | 796 Count | 518 Count | 4.05 VDC | 0.08 VDC |
| 1765656724 | 557 Count | 789 Count | 514 Count | 4.03 VDC | 0.08 VDC |
| 1765654919 | 552 Count | 782 Count | 510 Count | 4.03 VDC | 0.08 VDC |
| 1765653115 | 547 Count | 775 Count | 506 Count | 4.03 VDC | 0.08 VDC |
| 1765651307 | 542 Count | 768 Count | 502 Count | 4.02 VDC | 0.08 VDC |
| 1765649502 | 537 Count | 761 Count | 498 Count | 4.02 VDC | 0.08 VDC |
| 1765647698 | 528 Count | 750 Count | 490 Count | 4.02 VDC | 0.08 VDC |
| 1765645893 | 523 Count | 743 Count | 486 Count | 4.02 VDC | 0.08 VDC |
| 1765644089 | 518 Count | 736 Count | 482 Count | 4.02 VDC | 0.08 VDC |
| 1765642284 | 513 Count | 729 Count | 478 Count | 4.02 VDC | 0.08 VDC |
| 1765640480 | 508 Count | 722 Count | 474 Count | 4.02 VDC | 0.08 VDC |
| 1765638838 | 496 Count | 709 Count | 463 Count | 4.02 VDC | 0.08 VDC |
| 1765637033 | 490 Count | 701 Count | 458 Count | 4.02 VDC | 0.08 VDC |
| 1765635228 | 485 Count | 694 Count | 454 Count | 4.02 VDC | 0.08 VDC |
| 1765633424 | 480 Count | 687 Count | 450 Count | 4.02 VDC | 0.08 VDC |
| 1765631623 | 473 Count | 678 Count | 444 Count | 4.02 VDC | 0.08 VDC |
| 1765629818 | 467 Count | 670 Count | 439 Count | 4.04 VDC | 0.08 VDC |
| 1765617134 | 415 Count | 598 Count | 388 Count | 4.04 VDC | 0.08 VDC |
| 1765615325 | 390 Count | 570 Count | 364 Count | 4.03 VDC | 0.08 VDC |
| 1765613521 | 374 Count | 551 Count | 349 Count | 4.02 VDC | 0.08 VDC |
| 1765611716 | 368 Count | 543 Count | 344 Count | 4.03 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)