This is the latest recevied telemetry packets stored in our database for station/object DM5HR-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792929834 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 1792926234 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 1792922634 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 1792919034 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 1792915433 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 1792911832 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 1792908232 | 5.13 VDC | 0 | 0 | 0 | 0 |
| 1792904632 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 1792901032 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 1792897432 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 1792893831 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 1792890230 | 5.13 VDC | 0 | 0 | 0 | 0 |
| 1792886630 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 1792883030 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 1792879430 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 1792875829 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 1792872229 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 1792868628 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 1792865028 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 1792861428 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 1792857828 | 5.05 VDC | 0 | 0 | 0 | 0 |
| 1792854227 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 1792850627 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 1792847027 | 5.13 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)