This is the latest recevied telemetry packets stored in our database for station/object SQ1BHQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781595848 | 697 Count | 724 Count | 623 Count | 3.43 VDC | 0.08 VDC |
| 1781594044 | 696 Count | 722 Count | 623 Count | 3.45 VDC | 0.08 VDC |
| 1781592240 | 695 Count | 721 Count | 623 Count | 3.48 VDC | 0.08 VDC |
| 1781590436 | 694 Count | 718 Count | 623 Count | 3.5 VDC | 0.08 VDC |
| 1781588633 | 684 Count | 708 Count | 614 Count | 3.53 VDC | 0.08 VDC |
| 1781586829 | 681 Count | 704 Count | 612 Count | 3.55 VDC | 0.08 VDC |
| 1781585025 | 680 Count | 701 Count | 612 Count | 3.59 VDC | 0.08 VDC |
| 1781583222 | 679 Count | 699 Count | 612 Count | 3.62 VDC | 0.08 VDC |
| 1781581463 | 655 Count | 675 Count | 589 Count | 3.65 VDC | 0.08 VDC |
| 1781579659 | 650 Count | 669 Count | 585 Count | 3.67 VDC | 0.08 VDC |
| 1781577855 | 649 Count | 668 Count | 585 Count | 3.7 VDC | 0.08 VDC |
| 1781576051 | 648 Count | 666 Count | 585 Count | 3.71 VDC | 0.08 VDC |
| 1781574247 | 638 Count | 656 Count | 576 Count | 3.73 VDC | 0.08 VDC |
| 1781572443 | 628 Count | 645 Count | 567 Count | 3.74 VDC | 0.08 VDC |
| 1781570640 | 607 Count | 624 Count | 547 Count | 3.77 VDC | 0.08 VDC |
| 1781568835 | 588 Count | 605 Count | 529 Count | 3.79 VDC | 0.08 VDC |
| 1781567031 | 575 Count | 592 Count | 517 Count | 3.83 VDC | 0.08 VDC |
| 1781565227 | 547 Count | 564 Count | 490 Count | 3.85 VDC | 0.08 VDC |
| 1781563424 | 533 Count | 550 Count | 477 Count | 3.87 VDC | 0.08 VDC |
| 1781561620 | 514 Count | 529 Count | 459 Count | 3.89 VDC | 0.08 VDC |
| 1781559862 | 494 Count | 509 Count | 440 Count | 3.91 VDC | 0.08 VDC |
| 1781558058 | 483 Count | 498 Count | 430 Count | 3.92 VDC | 0.08 VDC |
| 1781556254 | 457 Count | 471 Count | 405 Count | 3.95 VDC | 0.08 VDC |
| 1781554451 | 415 Count | 430 Count | 364 Count | 3.97 VDC | 0.08 VDC |
| 1781552647 | 389 Count | 404 Count | 339 Count | 3.73 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)