This is the latest recevied telemetry packets stored in our database for station/object 9W2GDB-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793149729 | 93 Count | 3 Count | 3 Count | 3.96 VDC | 0.08 VDC |
| 1793149700 | 92 Count | 3 Count | 3 Count | 3.95 VDC | 0.08 VDC |
| 1793149636 | 90 Count | 3 Count | 3 Count | 3.95 VDC | 0.08 VDC |
| 1793149536 | 87 Count | 3 Count | 3 Count | 3.95 VDC | 0.08 VDC |
| 1793149521 | 86 Count | 3 Count | 3 Count | 3.94 VDC | 0.08 VDC |
| 1793149283 | 85 Count | 3 Count | 3 Count | 3.95 VDC | 0.08 VDC |
| 1793149095 | 84 Count | 3 Count | 3 Count | 3.96 VDC | 0.08 VDC |
| 1793127447 | 80 Count | 0 Count | 0 Count | 3.95 VDC | 0.08 VDC |
| 1793127415 | 79 Count | 0 Count | 0 Count | 3.95 VDC | 0.08 VDC |
| 1793127388 | 78 Count | 0 Count | 0 Count | 3.95 VDC | 0.08 VDC |
| 1793127365 | 77 Count | 0 Count | 0 Count | 3.94 VDC | 0.08 VDC |
| 1793127284 | 76 Count | 0 Count | 0 Count | 3.95 VDC | 0.08 VDC |
| 1793127256 | 75 Count | 0 Count | 0 Count | 3.95 VDC | 0.08 VDC |
| 1793127218 | 74 Count | 0 Count | 0 Count | 3.95 VDC | 0.08 VDC |
| 1793127145 | 73 Count | 0 Count | 0 Count | 3.95 VDC | 0.08 VDC |
| 1793127121 | 72 Count | 0 Count | 0 Count | 3.95 VDC | 0.08 VDC |
| 1793127103 | 71 Count | 0 Count | 0 Count | 3.95 VDC | 0.08 VDC |
| 1793127084 | 70 Count | 0 Count | 0 Count | 3.95 VDC | 0.08 VDC |
| 1793127048 | 69 Count | 0 Count | 0 Count | 3.95 VDC | 0.08 VDC |
| 1793126969 | 67 Count | 0 Count | 0 Count | 3.95 VDC | 0.08 VDC |
| 1793126919 | 66 Count | 0 Count | 0 Count | 3.95 VDC | 0.08 VDC |
| 1793126156 | 65 Count | 0 Count | 0 Count | 3.95 VDC | 0.08 VDC |
| 1793126076 | 64 Count | 0 Count | 0 Count | 3.95 VDC | 0.08 VDC |
| 1793126064 | 63 Count | 0 Count | 0 Count | 3.95 VDC | 0.08 VDC |
| 1793125709 | 62 Count | 0 Count | 0 Count | 3.95 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)