This is the latest recevied telemetry packets stored in our database for station/object OK2ILA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1789234280 | 4.17 VDC | 18.4 C | 8142 | 0 | 0 |
| 1789233377 | 4.17 VDC | 18.9 C | 8188 | 0 | 0 |
| 1789232474 | 4.19 VDC | 19.4 C | 8167 | 0 | 0 |
| 1789231571 | 4.19 VDC | 20.3 C | 8183 | 0 | 0 |
| 1789230668 | 4.19 VDC | 21.4 C | 8177 | 0 | 0 |
| 1789229765 | 4.17 VDC | 22.9 C | 8180 | 0 | 0 |
| 1789228862 | 4.17 VDC | 24.6 C | 8173 | 0 | 0 |
| 1789227959 | 4.17 VDC | 25.3 C | 8173 | 0 | 0 |
| 1789227056 | 4.17 VDC | 24.6 C | 8176 | 0 | 0 |
| 1789226153 | 4.17 VDC | 24.8 C | 8178 | 0 | 0 |
| 1789225250 | 4.17 VDC | 25.3 C | 8173 | 0 | 0 |
| 1789224347 | 4.17 VDC | 26.2 C | 8175 | 0 | 0 |
| 1789223444 | 4.17 VDC | 26.6 C | 8184 | 0 | 0 |
| 1789222541 | 4.17 VDC | 27 C | 8174 | 0 | 0 |
| 1789221638 | 4.17 VDC | 25.8 C | 8163 | 0 | 0 |
| 1789220735 | 4.17 VDC | 24.4 C | 8185 | 0 | 0 |
| 1789219832 | 4.17 VDC | 23.8 C | 8179 | 0 | 0 |
| 1789218929 | 4.19 VDC | 23.1 C | 8186 | 0 | 0 |
| 1789218026 | 4.19 VDC | 23.2 C | 8176 | 0 | 0 |
| 1789217123 | 4.19 VDC | 23.3 C | 8184 | 0 | 0 |
| 1789216220 | 4.19 VDC | 23.2 C | 8185 | 0 | 0 |
| 1789216097 | 4.19 VDC | 23.2 C | 8143 | 0 | 0 |
| 1789215526 | 4.19 VDC | 22.8 C | 8184 | 0 | 0 |
| 1789214623 | 4.19 VDC | 22.2 C | 8186 | 0 | 0 |
| 1789213720 | 4.19 VDC | 21.9 C | 8180 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)