This is the latest recevied telemetry packets stored in our database for station/object OK2ILA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1777578630 | 4.17 VDC | 10.1 C | 8273 | 0 | 0 |
| 1777577727 | 4.17 VDC | 10.7 C | 8234 | 0 | 0 |
| 1777576824 | 4.17 VDC | 11.4 C | 8247 | 0 | 0 |
| 1777575921 | 4.17 VDC | 12.1 C | 8249 | 0 | 0 |
| 1777575642 | 4.17 VDC | 12.2 C | 8052 | 0 | 0 |
| 1777575171 | 4.17 VDC | 12.4 C | 8182 | 0 | 0 |
| 1777574268 | 4.17 VDC | 12.8 C | 8228 | 0 | 0 |
| 1777573365 | 4.17 VDC | 13.3 C | 8203 | 0 | 0 |
| 1777572462 | 4.17 VDC | 14 C | 8224 | 0 | 0 |
| 1777571559 | 4.17 VDC | 14.6 C | 8247 | 0 | 0 |
| 1777570656 | 4.17 VDC | 15.3 C | 8228 | 0 | 0 |
| 1777569753 | 4.17 VDC | 16.1 C | 8245 | 0 | 0 |
| 1777568850 | 4.17 VDC | 16.9 C | 8218 | 0 | 0 |
| 1777567947 | 4.17 VDC | 18.2 C | 8238 | 0 | 0 |
| 1777567044 | 4.17 VDC | 19.8 C | 8222 | 0 | 0 |
| 1777566141 | 4.17 VDC | 21.6 C | 8236 | 0 | 0 |
| 1777565238 | 4.17 VDC | 22.9 C | 8225 | 0 | 0 |
| 1777564335 | 4.17 VDC | 23.4 C | 8224 | 0 | 0 |
| 1777562529 | 4.17 VDC | 23.4 C | 8239 | 0 | 0 |
| 1777561626 | 4.17 VDC | 23 C | 8249 | 0 | 0 |
| 1777560723 | 4.19 VDC | 22.6 C | 8248 | 0 | 0 |
| 1777559820 | 4.19 VDC | 22.8 C | 8267 | 0 | 0 |
| 1777558917 | 4.19 VDC | 22.9 C | 8247 | 0 | 0 |
| 1777558014 | 4.19 VDC | 22.5 C | 8231 | 0 | 0 |
| 1777557111 | 4.19 VDC | 22.2 C | 8221 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)