This is the latest recevied telemetry packets stored in our database for station/object SA3MHZ-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765899276 | 28.7 C | 22.28 % | 0 | 0 | 0 |
| 1765898762 | 26.3 C | 24.02 % | 0 | 0 | 0 |
| 1765898258 | 23.7 C | 26.06 % | 0 | 0 | 0 |
| 1765895747 | 16.4 C | 30.63 % | 0 | 0 | 0 |
| 1765888143 | 29.5 C | 18.92 % | 0 | 0 | 0 |
| 1765884728 | 33.9 C | 17.6 % | 0 | 0 | 0 |
| 1765884130 | 34 C | 17.42 % | 0 | 0 | 0 |
| 1765883637 | 34.2 C | 17.77 % | 0 | 0 | 0 |
| 1765883155 | 33.7 C | 18.33 % | 0 | 0 | 0 |
| 1765882721 | 32.9 C | 20.02 % | 0 | 0 | 0 |
| 1765882096 | 31.3 C | 22.14 % | 0 | 0 | 0 |
| 1765881623 | 29.9 C | 24.08 % | 0 | 0 | 0 |
| 1765881181 | 29 C | 26.85 % | 0 | 0 | 0 |
| 1765880539 | 26.7 C | 26.98 % | 0 | 0 | 0 |
| 1765880120 | 24.3 C | 29.75 % | 0 | 0 | 0 |
| 1765879359 | 19.9 C | 28.82 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)