This is the latest recevied telemetry packets stored in our database for station/object G3CWI-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1767180427 | 11.5 VDC | 0 | 0 | 0 | 0 |
| 1767179379 | 11.26 VDC | 0 | 0 | 0 | 0 |
| 1767175777 | 10.94 VDC | 0 | 0 | 0 | 0 |
| 1767174215 | 10.78 VDC | 0 | 0 | 0 | 0 |
| 1767170615 | 9.84 VDC | 0 | 0 | 0 | 0 |
| 1767167015 | 9.84 VDC | 0 | 0 | 0 | 0 |
| 1767165786 | 9.82 VDC | 0 | 0 | 0 | 0 |
| 1767162186 | 9.82 VDC | 0 | 0 | 0 | 0 |
| 1767158586 | 9.88 VDC | 0 | 0 | 0 | 0 |
| 1767154986 | 9.88 VDC | 0 | 0 | 0 | 0 |
| 1767151386 | 9.94 VDC | 0 | 0 | 0 | 0 |
| 1767147785 | 9.94 VDC | 0 | 0 | 0 | 0 |
| 1767144185 | 9.98 VDC | 0 | 0 | 0 | 0 |
| 1767140585 | 10.02 VDC | 0 | 0 | 0 | 0 |
| 1767136985 | 10.02 VDC | 0 | 0 | 0 | 0 |
| 1767133385 | 10.08 VDC | 0 | 0 | 0 | 0 |
| 1767129845 | 10.1 VDC | 0 | 0 | 0 | 0 |
| 1767128014 | 10.12 VDC | 0 | 0 | 0 | 0 |
| 1767127745 | 10.12 VDC | 0 | 0 | 0 | 0 |
| 1767124145 | 10.42 VDC | 0 | 0 | 0 | 0 |
| 1767117573 | 12.22 VDC | 0 | 0 | 0 | 0 |
| 1767113973 | 12.32 VDC | 0 | 0 | 0 | 0 |
| 1767110373 | 12.38 VDC | 0 | 0 | 0 | 0 |
| 1767106772 | 12.8 VDC | 0 | 0 | 0 | 0 |
| 1767103172 | 13.02 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)