This is the latest recevied telemetry packets stored in our database for station/object G3CWI-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764807581 | 12.16 VDC | 0 | 0 | 0 | 0 |
| 1764803981 | 12.18 VDC | 0 | 0 | 0 | 0 |
| 1764800381 | 12.22 VDC | 0 | 0 | 0 | 0 |
| 1764796781 | 12.24 VDC | 0 | 0 | 0 | 0 |
| 1764793181 | 12.26 VDC | 0 | 0 | 0 | 0 |
| 1764789580 | 12.28 VDC | 0 | 0 | 0 | 0 |
| 1764785980 | 12.32 VDC | 0 | 0 | 0 | 0 |
| 1764782380 | 12.32 VDC | 0 | 0 | 0 | 0 |
| 1764778780 | 12.42 VDC | 0 | 0 | 0 | 0 |
| 1764775180 | 13.64 VDC | 0 | 0 | 0 | 0 |
| 1764771580 | 13.12 VDC | 0 | 0 | 0 | 0 |
| 1764767980 | 13.9 VDC | 0 | 0 | 0 | 0 |
| 1764764379 | 13.78 VDC | 0 | 0 | 0 | 0 |
| 1764760779 | 13.28 VDC | 0 | 0 | 0 | 0 |
| 1764757182 | 13.2 VDC | 0 | 0 | 0 | 0 |
| 1764753579 | 11.54 VDC | 0 | 0 | 0 | 0 |
| 1764751303 | 10.06 VDC | 0 | 0 | 0 | 0 |
| 1764747706 | 9.86 VDC | 0 | 0 | 0 | 0 |
| 1764744098 | 9.94 VDC | 0 | 0 | 0 | 0 |
| 1764740498 | 9.98 VDC | 0 | 0 | 0 | 0 |
| 1764736898 | 10.02 VDC | 0 | 0 | 0 | 0 |
| 1764733298 | 10.06 VDC | 0 | 0 | 0 | 0 |
| 1764729698 | 10.14 VDC | 0 | 0 | 0 | 0 |
| 1764726098 | 10.24 VDC | 0 | 0 | 0 | 0 |
| 1764722498 | 10.3 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)