This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1789715524 | 14 | 204 | 0 | 422 | 270 |
| 1789713724 | 13 | 195 | 0 | 422 | 215 |
| 1789711926 | 12 | 184 | 0 | 422 | 215 |
| 1789710126 | 11 | 163 | 0 | 421 | 216 |
| 1789708328 | 10 | 151 | 0 | 420 | 216 |
| 1789706530 | 9 | 134 | 0 | 420 | 165 |
| 1789704730 | 8 | 122 | 0 | 420 | 0 |
| 1789702931 | 7 | 109 | 0 | 421 | 0 |
| 1789701132 | 6 | 96 | 0 | 421 | 0 |
| 1789699333 | 5 | 83 | 0 | 420 | 0 |
| 1789697535 | 4 | 65 | 0 | 421 | 0 |
| 1789695735 | 3 | 52 | 0 | 421 | 0 |
| 1789693935 | 2 | 39 | 0 | 421 | 0 |
| 1789692137 | 1 | 26 | 0 | 421 | 0 |
| 1789690337 | 0 | 13 | 0 | 421 | 0 |
| 1789688538 | 83 | 1013 | 0 | 421 | 0 |
| 1789686740 | 82 | 1000 | 0 | 421 | 0 |
| 1789684942 | 81 | 983 | 0 | 421 | 0 |
| 1789683143 | 80 | 970 | 0 | 421 | 0 |
| 1789681344 | 79 | 956 | 0 | 422 | 0 |
| 1789679545 | 78 | 943 | 0 | 422 | 0 |
| 1789677746 | 77 | 933 | 0 | 422 | 0 |
| 1789675949 | 76 | 916 | 0 | 422 | 0 |
| 1789674149 | 75 | 905 | 0 | 422 | 0 |
| 1789672350 | 74 | 892 | 0 | 422 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)