This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789221763 | 12 Count | 370 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1789218163 | 12 Count | 320 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1789214563 | 12 Count | 301 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1789210963 | 3 Count | 254 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1789207363 | 3 Count | 232 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1789203763 | 0 Count | 176 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1789200163 | 0 Count | 167 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1789196562 | 0 Count | 159 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1789192962 | 0 Count | 147 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1789189413 | 0 Count | 134 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1789185813 | 0 Count | 122 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1789182213 | 0 Count | 109 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1789178613 | 0 Count | 100 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1789175013 | 0 Count | 91 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1789171412 | 0 Count | 81 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1789167812 | 0 Count | 69 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1789164212 | 0 Count | 50 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1789160612 | 0 Count | 36 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1789157012 | 0 Count | 25 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1789153412 | 0 Count | 18 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1789149812 | 0 Count | 1025 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1789146211 | 0 Count | 999 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1789142611 | 0 Count | 984 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1789139011 | 0 Count | 962 Count | 0 Count | 3.92 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)