This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762371354 | 92 Count | 859 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1762367754 | 92 Count | 851 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1762364154 | 89 Count | 838 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1762360554 | 89 Count | 830 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1762356954 | 51 Count | 793 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1762353354 | 46 Count | 783 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1762349754 | 46 Count | 775 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1762346153 | 46 Count | 766 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1762342554 | 46 Count | 752 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1762338954 | 46 Count | 743 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1762335354 | 46 Count | 735 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1762331754 | 46 Count | 727 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1762328154 | 46 Count | 718 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1762324554 | 46 Count | 710 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1762320954 | 46 Count | 701 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1762317353 | 46 Count | 692 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1762313753 | 46 Count | 684 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1762310153 | 46 Count | 675 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1762306553 | 46 Count | 667 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1762302953 | 46 Count | 659 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1762299353 | 46 Count | 644 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1762295753 | 46 Count | 636 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1762292152 | 46 Count | 627 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1762288552 | 46 Count | 619 Count | 0 Count | 3.91 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)