This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1768020214 | 8 Count | 913 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1768016614 | 8 Count | 905 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1768013014 | 8 Count | 892 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1768009414 | 8 Count | 883 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1768005814 | 8 Count | 875 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1768002214 | 8 Count | 866 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1767998614 | 8 Count | 859 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1767995013 | 8 Count | 851 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1767991413 | 8 Count | 843 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1767987813 | 8 Count | 835 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1767984213 | 8 Count | 826 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1767980613 | 8 Count | 818 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1767977013 | 8 Count | 810 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1767973412 | 8 Count | 800 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1767969812 | 8 Count | 787 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1767966212 | 8 Count | 778 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1767962612 | 8 Count | 770 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1767959013 | 8 Count | 762 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1767955413 | 8 Count | 753 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1767951813 | 8 Count | 745 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1767948213 | 8 Count | 736 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1767944612 | 8 Count | 728 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1767941012 | 8 Count | 720 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1767937412 | 8 Count | 711 Count | 0 Count | 3.92 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)