This is the latest recevied telemetry packets stored in our database for station/object SR2GKG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
---|---|---|---|---|---|
1751554955 | 115 Count | 131 Count | 107 Count | 4.41 VDC | 0 VDC |
1751553154 | 98 Count | 95 Count | 91 Count | 4.4 VDC | 0 VDC |
1751551353 | 79 Count | 77 Count | 73 Count | 4.4 VDC | 0 VDC |
1751549553 | 31 Count | 28 Count | 26 Count | 4.4 VDC | 0 VDC |
1751547752 | 4 Count | 0 Count | 0 Count | 4.4 VDC | 0 VDC |
1751545958 | 798 Count | 984 Count | 778 Count | 4.41 VDC | 0 VDC |
1751544157 | 723 Count | 908 Count | 704 Count | 4.39 VDC | 0 VDC |
1751542357 | 700 Count | 886 Count | 682 Count | 4.4 VDC | 0 VDC |
1751540556 | 669 Count | 855 Count | 652 Count | 4.39 VDC | 0 VDC |
1751538755 | 646 Count | 832 Count | 630 Count | 4.41 VDC | 0 VDC |
1751536955 | 619 Count | 805 Count | 604 Count | 4.41 VDC | 0 VDC |
1751535154 | 576 Count | 762 Count | 562 Count | 4.38 VDC | 0 VDC |
1751533353 | 511 Count | 698 Count | 498 Count | 4.4 VDC | 0 VDC |
1751531552 | 478 Count | 665 Count | 466 Count | 4.4 VDC | 0 VDC |
1751529751 | 452 Count | 633 Count | 441 Count | 4.39 VDC | 0 VDC |
1751527951 | 411 Count | 591 Count | 401 Count | 4.39 VDC | 0 VDC |
1751526150 | 363 Count | 541 Count | 354 Count | 4.39 VDC | 0 VDC |
1751524356 | 273 Count | 452 Count | 269 Count | 4.4 VDC | 0 VDC |
1751522556 | 157 Count | 329 Count | 154 Count | 4.41 VDC | 0 VDC |
1751520755 | 115 Count | 258 Count | 113 Count | 4.4 VDC | 0 VDC |
1751518954 | 63 Count | 127 Count | 62 Count | 4.4 VDC | 0 VDC |
1751517154 | 610 Count | 1046 Count | 595 Count | 4.41 VDC | 0 VDC |
1751515353 | 553 Count | 906 Count | 539 Count | 4.39 VDC | 0 VDC |
1751513552 | 498 Count | 767 Count | 485 Count | 4.39 VDC | 0 VDC |
1751511752 | 449 Count | 666 Count | 437 Count | 4.39 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)