This is the latest recevied telemetry packets stored in our database for station/object SP2WIT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1751626525 | 68 Count | 851 Count | 22 Count | 4.18 VDC | 5.8 VDC |
| 1751624726 | 67 Count | 840 Count | 22 Count | 4.18 VDC | 5.8 VDC |
| 1751622926 | 66 Count | 826 Count | 22 Count | 4.18 VDC | 5.82 VDC |
| 1751621127 | 65 Count | 813 Count | 22 Count | 4.18 VDC | 5.8 VDC |
| 1751619331 | 64 Count | 800 Count | 22 Count | 4.18 VDC | 5.82 VDC |
| 1751619319 | 59 Count | 800 Count | 22 Count | 4.18 VDC | 5.8 VDC |
| 1751617521 | 58 Count | 792 Count | 22 Count | 4.19 VDC | 5.8 VDC |
| 1751615721 | 57 Count | 782 Count | 22 Count | 4.19 VDC | 5.8 VDC |
| 1751613922 | 56 Count | 775 Count | 22 Count | 4.19 VDC | 5.8 VDC |
| 1751612123 | 55 Count | 767 Count | 22 Count | 4.2 VDC | 5.8 VDC |
| 1751610324 | 54 Count | 761 Count | 22 Count | 4.2 VDC | 5.8 VDC |
| 1751608525 | 53 Count | 760 Count | 22 Count | 4.21 VDC | 5.78 VDC |
| 1751606724 | 52 Count | 760 Count | 22 Count | 4.2 VDC | 4.88 VDC |
| 1751604925 | 51 Count | 760 Count | 22 Count | 4.13 VDC | 5.78 VDC |
| 1751603127 | 50 Count | 754 Count | 22 Count | 4.14 VDC | 4.64 VDC |
| 1751601327 | 49 Count | 754 Count | 22 Count | 4.13 VDC | 4.66 VDC |
| 1751599527 | 48 Count | 746 Count | 22 Count | 4.12 VDC | 4.66 VDC |
| 1751597729 | 47 Count | 746 Count | 22 Count | 4.12 VDC | 4.68 VDC |
| 1751595929 | 46 Count | 724 Count | 22 Count | 4.12 VDC | 0.58 VDC |
| 1751594131 | 45 Count | 694 Count | 22 Count | 4.12 VDC | 0 VDC |
| 1751592331 | 44 Count | 670 Count | 22 Count | 4.12 VDC | 0 VDC |
| 1751590532 | 43 Count | 640 Count | 22 Count | 4.12 VDC | 0 VDC |
| 1751588734 | 42 Count | 615 Count | 22 Count | 4.12 VDC | 0 VDC |
| 1751586935 | 41 Count | 587 Count | 22 Count | 4.12 VDC | 0 VDC |
| 1751585136 | 39 Count | 565 Count | 21 Count | 4.13 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)