This is the latest recevied telemetry packets stored in our database for station/object IW1DBF-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1752220050 | 20 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1752218247 | 15 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1752216444 | 11 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1752214641 | 8 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1752212838 | 4 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1752212602 | 6 Count | 109 Count | 0 Count | 0 VDC | 0 VDC |
| 1752212515 | 4 Count | 118 Count | 0 Count | 0 VDC | 0 VDC |
| 1752211991 | 83 Count | 2 Count | 2 Count | 0 VDC | 0 VDC |
| 1752211954 | 78 Count | 2 Count | 2 Count | 0 VDC | 0 VDC |
| 1752211910 | 76 Count | 1 Count | 1 Count | 0 VDC | 0 VDC |
| 1752211879 | 71 Count | 1 Count | 1 Count | 0 VDC | 0 VDC |
| 1752211743 | 66 Count | 1 Count | 1 Count | 0 VDC | 0 VDC |
| 1752211528 | 66 Count | 1 Count | 1 Count | 0 VDC | 0 VDC |
| 1752211457 | 64 Count | 1 Count | 1 Count | 0 VDC | 0 VDC |
| 1752211400 | 63 Count | 1 Count | 1 Count | 0 VDC | 0 VDC |
| 1752211290 | 58 Count | 1 Count | 1 Count | 0 VDC | 0 VDC |
| 1752211220 | 52 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1752210952 | 47 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1752210864 | 42 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1752210641 | 32 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1752209945 | 31 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1752208145 | 30 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1752206344 | 29 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1752205752 | 28 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1752205676 | 27 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)