This is the latest recevied telemetry packets stored in our database for station/object 9M2SGN-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1777500211 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777499308 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777498407 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777497506 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777496638 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777495737 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777494835 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777493934 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777493033 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777492131 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777491230 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777490328 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777489427 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777488526 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777487624 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777486722 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777485821 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777484919 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777484018 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777483116 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777482215 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777481314 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777480412 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777479511 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1777478609 | 0.54 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)