This is the latest recevied telemetry packets stored in our database for station/object PA3GET-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1781244860 | 410 | 0 | 0 | 0 | 0 |
| 1781243959 | 410 | 0 | 0 | 0 | 0 |
| 1781243058 | 410 | 0 | 0 | 0 | 0 |
| 1781242157 | 410 | 0 | 0 | 0 | 0 |
| 1781241257 | 410 | 0 | 0 | 0 | 0 |
| 1781240356 | 410 | 0 | 0 | 0 | 0 |
| 1781239456 | 410 | 0 | 0 | 0 | 0 |
| 1781238555 | 410 | 0 | 0 | 0 | 0 |
| 1781237655 | 410 | 0 | 0 | 0 | 0 |
| 1781236754 | 411 | 0 | 0 | 0 | 0 |
| 1781235853 | 410 | 0 | 0 | 0 | 0 |
| 1781234952 | 411 | 0 | 0 | 0 | 0 |
| 1781234051 | 410 | 0 | 0 | 0 | 0 |
| 1781233150 | 410 | 0 | 0 | 0 | 0 |
| 1781232250 | 410 | 0 | 0 | 0 | 0 |
| 1781231349 | 410 | 0 | 0 | 0 | 0 |
| 1781230449 | 410 | 0 | 0 | 0 | 0 |
| 1781229548 | 410 | 0 | 0 | 0 | 0 |
| 1781228648 | 410 | 0 | 0 | 0 | 0 |
| 1781227748 | 410 | 0 | 0 | 0 | 0 |
| 1781226847 | 410 | 0 | 0 | 0 | 0 |
| 1781225947 | 410 | 0 | 0 | 0 | 0 |
| 1781225047 | 410 | 0 | 0 | 0 | 0 |
| 1781224146 | 411 | 0 | 0 | 0 | 0 |
| 1781223246 | 410 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)