This is the latest recevied telemetry packets stored in our database for station/object DH9FAX-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1747137903 | 400 | 0 | 0 | 0 | 0 |
| 1747136883 | 400 | 0 | 0 | 0 | 0 |
| 1747135863 | 400 | 0 | 0 | 0 | 0 |
| 1747134842 | 400 | 0 | 0 | 0 | 0 |
| 1747133822 | 400 | 0 | 0 | 0 | 0 |
| 1747132802 | 400 | 0 | 0 | 0 | 0 |
| 1747131782 | 400 | 0 | 0 | 0 | 0 |
| 1747130762 | 400 | 0 | 0 | 0 | 0 |
| 1747129742 | 400 | 0 | 0 | 0 | 0 |
| 1747128722 | 400 | 0 | 0 | 0 | 0 |
| 1747127702 | 400 | 0 | 0 | 0 | 0 |
| 1747126682 | 400 | 0 | 0 | 0 | 0 |
| 1747125662 | 400 | 0 | 0 | 0 | 0 |
| 1747124642 | 400 | 0 | 0 | 0 | 0 |
| 1747123621 | 400 | 0 | 0 | 0 | 0 |
| 1747122601 | 400 | 0 | 0 | 0 | 0 |
| 1747121581 | 400 | 0 | 0 | 0 | 0 |
| 1747120561 | 400 | 0 | 0 | 0 | 0 |
| 1747119541 | 400 | 0 | 0 | 0 | 0 |
| 1747118521 | 400 | 0 | 0 | 0 | 0 |
| 1747117501 | 400 | 0 | 0 | 0 | 0 |
| 1747116481 | 400 | 0 | 0 | 0 | 0 |
| 1747115461 | 400 | 0 | 0 | 0 | 0 |
| 1747114441 | 400 | 0 | 0 | 0 | 0 |
| 1747113420 | 400 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)