This is the latest recevied telemetry packets stored in our database for station/object ED1ZAP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1772225016 | 446 | 0 | 0 | 0 | 0 |
| 1772223816 | 445 | 0 | 0 | 0 | 0 |
| 1772222590 | 445 | 0 | 0 | 0 | 0 |
| 1772221391 | 442 | 0 | 0 | 0 | 0 |
| 1772220190 | 445 | 0 | 0 | 0 | 0 |
| 1772218990 | 447 | 0 | 0 | 0 | 0 |
| 1772217790 | 445 | 0 | 0 | 0 | 0 |
| 1772216590 | 442 | 0 | 0 | 0 | 0 |
| 1772215377 | 445 | 0 | 0 | 0 | 0 |
| 1772214177 | 447 | 0 | 0 | 0 | 0 |
| 1772212976 | 445 | 0 | 0 | 0 | 0 |
| 1772211776 | 443 | 0 | 0 | 0 | 0 |
| 1772210577 | 445 | 0 | 0 | 0 | 0 |
| 1772209376 | 446 | 0 | 0 | 0 | 0 |
| 1772208176 | 445 | 0 | 0 | 0 | 0 |
| 1772206979 | 444 | 0 | 0 | 0 | 0 |
| 1772205776 | 444 | 0 | 0 | 0 | 0 |
| 1772204581 | 444 | 0 | 0 | 0 | 0 |
| 1772203376 | 446 | 0 | 0 | 0 | 0 |
| 1772202150 | 445 | 0 | 0 | 0 | 0 |
| 1772200950 | 451 | 0 | 0 | 0 | 0 |
| 1772199749 | 445 | 0 | 0 | 0 | 0 |
| 1772198549 | 446 | 0 | 0 | 0 | 0 |
| 1772197350 | 445 | 0 | 0 | 0 | 0 |
| 1772196152 | 445 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)