This is the latest recevied telemetry packets stored in our database for station/object G3CWI-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1773646263 | 13.04 VDC | 0 | 0 | 0 | 0 |
| 1773642663 | 12.16 VDC | 0 | 0 | 0 | 0 |
| 1773639062 | 12.14 VDC | 0 | 0 | 0 | 0 |
| 1773635463 | 12.18 VDC | 0 | 0 | 0 | 0 |
| 1773631864 | 12.22 VDC | 0 | 0 | 0 | 0 |
| 1773628262 | 12.22 VDC | 0 | 0 | 0 | 0 |
| 1773624662 | 12.26 VDC | 0 | 0 | 0 | 0 |
| 1773621062 | 12.26 VDC | 0 | 0 | 0 | 0 |
| 1773617461 | 12.28 VDC | 0 | 0 | 0 | 0 |
| 1773613861 | 12.3 VDC | 0 | 0 | 0 | 0 |
| 1773610261 | 12.32 VDC | 0 | 0 | 0 | 0 |
| 1773606661 | 12.32 VDC | 0 | 0 | 0 | 0 |
| 1773603061 | 12.36 VDC | 0 | 0 | 0 | 0 |
| 1773599461 | 12.4 VDC | 0 | 0 | 0 | 0 |
| 1773595861 | 13.86 VDC | 0 | 0 | 0 | 0 |
| 1773592260 | 13.28 VDC | 0 | 0 | 0 | 0 |
| 1773588660 | 13.88 VDC | 0 | 0 | 0 | 0 |
| 1773585060 | 13.86 VDC | 0 | 0 | 0 | 0 |
| 1773581460 | 13.88 VDC | 0 | 0 | 0 | 0 |
| 1773577860 | 13.88 VDC | 0 | 0 | 0 | 0 |
| 1773574260 | 13.86 VDC | 0 | 0 | 0 | 0 |
| 1773570660 | 13.88 VDC | 0 | 0 | 0 | 0 |
| 1773567059 | 13.88 VDC | 0 | 0 | 0 | 0 |
| 1773563459 | 13.92 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)