This is the latest recevied telemetry packets stored in our database for station/object LZ0VRC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Presaure* | Power* | Value5* |
|---|---|---|---|---|---|
| 1757948480 | 29.54 C | 28.56 %RH | 979 hPa | 5.63 V | 0 |
| 1757948185 | 28.79 C | 28.95 %RH | 979 hPa | 5.61 V | 0 |
| 1757948180 | 28.79 C | 28.95 %RH | 979 hPa | 5.61 V | 0 |
| 1757947881 | 27.02 C | 32.07 %RH | 979 hPa | 5.68 V | 0 |
| 1757947585 | 27.95 C | 31.21 %RH | 979 hPa | 5.64 V | 0 |
| 1757947581 | 27.95 C | 31.21 %RH | 979 hPa | 5.64 V | 0 |
| 1757947281 | 28.72 C | 28.57 %RH | 979 hPa | 5.64 V | 0 |
| 1757946985 | 29.26 C | 27.8 %RH | 979 hPa | 5.66 V | 0 |
| 1757946981 | 29.29 C | 27.69 %RH | 979 hPa | 5.65 V | 0 |
| 1757946681 | 29.38 C | 27.31 %RH | 979 hPa | 5.61 V | 0 |
| 1757946385 | 30.27 C | 26.33 %RH | 979 hPa | 5.65 V | 0 |
| 1757946381 | 30.27 C | 26.33 %RH | 979 hPa | 5.65 V | 0 |
| 1757946081 | 30.54 C | 27.27 %RH | 979 hPa | 5.59 V | 0 |
| 1757945785 | 31.79 C | 25.53 %RH | 979 hPa | 5.66 V | 0 |
| 1757945781 | 31.79 C | 25.53 %RH | 979 hPa | 5.66 V | 0 |
| 1757945481 | 30.02 C | 28.47 %RH | 979 hPa | 5.68 V | 0 |
| 1757945185 | 29.43 C | 29.26 %RH | 979 hPa | 5.65 V | 0 |
| 1757945181 | 29.43 C | 29.38 %RH | 979 hPa | 5.65 V | 0 |
| 1757944881 | 29.69 C | 30.56 %RH | 979 hPa | 5.63 V | 0 |
| 1757944585 | 29.72 C | 30.81 %RH | 979 hPa | 5.64 V | 0 |
| 1757944581 | 29.71 C | 30.85 %RH | 979 hPa | 5.62 V | 0 |
| 1757944281 | 29.94 C | 30.03 %RH | 979 hPa | 5.62 V | 0 |
| 1757943985 | 30.57 C | 30.11 %RH | 979 hPa | 5.66 V | 0 |
| 1757943981 | 30.57 C | 30.11 %RH | 979 hPa | 5.66 V | 0 |
| 1757943681 | 32.11 C | 27.29 %RH | 980 hPa | 5.68 V | 0 |
*Used Equation Coefficients:
Temp: 0, 0.01, 0
Humi: 0, 0.01, 0
Presaure: 0, 1, 0
Power: 0, 0.01, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)