EA2RCF LoRa APRS MAP

My position About Go to BACKUP map Powered by EA2RCF Radioclub Foronda ☰

reset

LZ0VRC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ0VRC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Humi*	Presaure*	Power*
1762226957	10.56 C	82.8 %RH	981 hPa	5.66 V
1762226661	10.65 C	82.8 %RH	981 hPa	5.63 V
1762226657	10.65 C	82.8 %RH	981 hPa	5.63 V
1762226357	10.82 C	82.75 %RH	981 hPa	5.67 V
1762226061	10.78 C	82.8 %RH	981 hPa	5.61 V
1762226057	10.78 C	82.8 %RH	981 hPa	5.61 V
1762225757	10.78 C	82.8 %RH	981 hPa	5.66 V
1762225461	10.78 C	82.8 %RH	981 hPa	5.66 V
1762225457	10.78 C	82.8 %RH	981 hPa	5.64 V
1762225157	10.86 C	82.77 %RH	981 hPa	5.68 V
1762224861	10.85 C	82.8 %RH	981 hPa	5.66 V
1762224857	10.85 C	82.8 %RH	981 hPa	5.67 V
1762224557	10.88 C	82.8 %RH	981 hPa	5.6 V
1762224261	10.86 C	82.8 %RH	981 hPa	5.64 V
1762224257	10.86 C	82.8 %RH	981 hPa	5.64 V
1762223957	10.89 C	82.8 %RH	981 hPa	5.61 V
1762223661	10.88 C	82.8 %RH	981 hPa	5.64 V
1762223657	10.88 C	82.8 %RH	981 hPa	5.64 V
1762223357	10.85 C	82.8 %RH	981 hPa	5.6 V
1762223061	10.82 C	82.8 %RH	981 hPa	5.61 V
1762223057	10.82 C	82.8 %RH	981 hPa	5.64 V
1762222757	10.77 C	82.8 %RH	981 hPa	5.62 V
1762222461	10.96 C	82.17 %RH	981 hPa	5.62 V
1762222457	10.96 C	82.17 %RH	981 hPa	5.62 V
1762222157	10.92 C	82.8 %RH	981 hPa	5.67 V

*Used Equation Coefficients:

Temp: 0, 0.01, 0

Humi: 0, 0.01, 0

Presaure: 0, 1, 0

Power: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)