This is the latest recevied telemetry packets stored in our database for station/object CE1RLP-38. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779032693 | 4.26 VDC | 14.72 VDC | 0 | 0 | 0 |
| 1779031792 | 4.26 VDC | 14.48 VDC | 0 | 0 | 0 |
| 1779030892 | 4.26 VDC | 14.38 VDC | 0 | 0 | 0 |
| 1779029991 | 4.25 VDC | 13.84 VDC | 0 | 0 | 0 |
| 1779029090 | 4.27 VDC | 13.86 VDC | 0 | 0 | 0 |
| 1779028189 | 4.26 VDC | 13.64 VDC | 0 | 0 | 0 |
| 1779027289 | 4.26 VDC | 13.58 VDC | 0 | 0 | 0 |
| 1779026388 | 4.25 VDC | 13.5 VDC | 0 | 0 | 0 |
| 1779025487 | 4.27 VDC | 13.84 VDC | 0 | 0 | 0 |
| 1779024587 | 4.26 VDC | 13.72 VDC | 0 | 0 | 0 |
| 1779023686 | 4.26 VDC | 13.54 VDC | 0 | 0 | 0 |
| 1779022785 | 4.28 VDC | 13.06 VDC | 0 | 0 | 0 |
| 1779021885 | 4.28 VDC | 13.1 VDC | 0 | 0 | 0 |
| 1779020984 | 4.25 VDC | 13.06 VDC | 0 | 0 | 0 |
| 1779019166 | 4.26 VDC | 12.96 VDC | 0 | 0 | 0 |
| 1779018299 | 4.27 VDC | 12.98 VDC | 0 | 0 | 0 |
| 1779017398 | 4.28 VDC | 12.98 VDC | 0 | 0 | 0 |
| 1779016498 | 4.26 VDC | 13 VDC | 0 | 0 | 0 |
| 1779015597 | 4.27 VDC | 12.98 VDC | 0 | 0 | 0 |
| 1779014696 | 4.26 VDC | 13 VDC | 0 | 0 | 0 |
| 1779013796 | 4.26 VDC | 13 VDC | 0 | 0 | 0 |
| 1779012895 | 4.28 VDC | 13 VDC | 0 | 0 | 0 |
| 1779011994 | 4.26 VDC | 13.02 VDC | 0 | 0 | 0 |
| 1779011093 | 4.28 VDC | 13.02 VDC | 0 | 0 | 0 |
| 1779009291 | 4.27 VDC | 13.04 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)