This is the latest recevied telemetry packets stored in our database for station/object 5P0A-27. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1757901774 | 11.9 C | 0 % | 0 hPa | 0 | 0 |
| 1757892745 | 11.9 C | 0 % | 0 hPa | 0 | 0 |
| 1757883714 | 13.6 C | 79.07 % | 1009 hPa | 0 | 0 |
| 1757874684 | 13 C | 75.58 % | 1012.38 hPa | 0 | 0 |
| 1757868967 | 16.6 C | 72.66 % | 1012.38 hPa | 0 | 0 |
| 1757868432 | 15.6 C | 73.04 % | 1012.5 hPa | 0 | 0 |
| 1757864230 | 16.5 C | 74.9 % | 1013 hPa | 0 | 0 |
| 1757863109 | 16.7 C | 75.55 % | 1013 hPa | 0 | 0 |
| 1757848482 | 21.3 C | 79.87 % | 1013.38 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)