This is the latest recevied telemetry packets stored in our database for station/object SP7THR-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1756576771 | 0 Count | 681 Count | 0 Count | 0 VDC | 0 VDC |
| 1756575571 | 0 Count | 679 Count | 0 Count | 0 VDC | 0 VDC |
| 1756574371 | 0 Count | 677 Count | 0 Count | 0 VDC | 0 VDC |
| 1756573169 | 0 Count | 675 Count | 0 Count | 0 VDC | 0 VDC |
| 1756571969 | 0 Count | 673 Count | 0 Count | 0 VDC | 0 VDC |
| 1756570769 | 0 Count | 671 Count | 0 Count | 0 VDC | 0 VDC |
| 1756569569 | 0 Count | 669 Count | 0 Count | 0 VDC | 0 VDC |
| 1756568369 | 0 Count | 667 Count | 0 Count | 0 VDC | 0 VDC |
| 1756567169 | 0 Count | 667 Count | 0 Count | 0 VDC | 0 VDC |
| 1756565969 | 0 Count | 665 Count | 0 Count | 0 VDC | 0 VDC |
| 1756564769 | 0 Count | 663 Count | 0 Count | 0 VDC | 0 VDC |
| 1756563569 | 0 Count | 662 Count | 0 Count | 0 VDC | 0 VDC |
| 1756562369 | 0 Count | 660 Count | 0 Count | 0 VDC | 0 VDC |
| 1756561169 | 0 Count | 651 Count | 0 Count | 0 VDC | 0 VDC |
| 1756559969 | 0 Count | 639 Count | 0 Count | 0 VDC | 0 VDC |
| 1756558769 | 0 Count | 637 Count | 0 Count | 0 VDC | 0 VDC |
| 1756557569 | 0 Count | 635 Count | 0 Count | 0 VDC | 0 VDC |
| 1756556369 | 0 Count | 633 Count | 0 Count | 0 VDC | 0 VDC |
| 1756555169 | 0 Count | 631 Count | 0 Count | 0 VDC | 0 VDC |
| 1756553968 | 0 Count | 629 Count | 0 Count | 0 VDC | 0 VDC |
| 1756552768 | 0 Count | 627 Count | 0 Count | 0 VDC | 0 VDC |
| 1756551568 | 0 Count | 625 Count | 0 Count | 0 VDC | 0 VDC |
| 1756550368 | 0 Count | 623 Count | 0 Count | 0 VDC | 0 VDC |
| 1756549168 | 0 Count | 621 Count | 0 Count | 0 VDC | 0 VDC |
| 1756547968 | 0 Count | 618 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)