This is the latest recevied telemetry packets stored in our database for station/object SR2GKG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789226862 | 307 Count | 441 Count | 297 Count | 4.3 VDC | 0 VDC |
| 1789225069 | 286 Count | 415 Count | 281 Count | 4.3 VDC | 0 VDC |
| 1789223268 | 243 Count | 353 Count | 239 Count | 4.31 VDC | 0 VDC |
| 1789221467 | 178 Count | 271 Count | 175 Count | 4.28 VDC | 0 VDC |
| 1789219666 | 92 Count | 135 Count | 90 Count | 4.28 VDC | 0 VDC |
| 1789217866 | 51 Count | 80 Count | 50 Count | 4.3 VDC | 0 VDC |
| 1789216065 | 26 Count | 45 Count | 26 Count | 4.3 VDC | 0 VDC |
| 1789214264 | 534 Count | 1018 Count | 494 Count | 4.3 VDC | 0 VDC |
| 1789212464 | 489 Count | 970 Count | 460 Count | 4.3 VDC | 0 VDC |
| 1789210663 | 471 Count | 942 Count | 443 Count | 4.29 VDC | 0 VDC |
| 1789208862 | 449 Count | 902 Count | 422 Count | 4.31 VDC | 0 VDC |
| 1789207061 | 432 Count | 874 Count | 406 Count | 4.3 VDC | 0 VDC |
| 1789205261 | 412 Count | 846 Count | 390 Count | 4.29 VDC | 0 VDC |
| 1789203468 | 360 Count | 792 Count | 351 Count | 4.3 VDC | 0 VDC |
| 1789201667 | 341 Count | 756 Count | 333 Count | 4.29 VDC | 0 VDC |
| 1789199866 | 307 Count | 701 Count | 300 Count | 4.3 VDC | 0 VDC |
| 1789198066 | 282 Count | 648 Count | 276 Count | 4.3 VDC | 0 VDC |
| 1789196265 | 244 Count | 568 Count | 239 Count | 4.29 VDC | 0 VDC |
| 1789194464 | 184 Count | 426 Count | 181 Count | 4.29 VDC | 0 VDC |
| 1789192663 | 131 Count | 289 Count | 129 Count | 4.28 VDC | 0 VDC |
| 1789190863 | 86 Count | 177 Count | 85 Count | 4.29 VDC | 0 VDC |
| 1789189062 | 42 Count | 93 Count | 42 Count | 4.28 VDC | 0 VDC |
| 1789187261 | 578 Count | 1074 Count | 563 Count | 4.29 VDC | 0 VDC |
| 1789185461 | 532 Count | 976 Count | 518 Count | 4.31 VDC | 0 VDC |
| 1789183660 | 488 Count | 891 Count | 475 Count | 4.29 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)