This is the latest recevied telemetry packets stored in our database for station/object DL1DH-22. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1755716103 | 0 | 0 | 0 | 0 | 0 |
| 1755715201 | 0 | 0 | 0 | 0 | 0 |
| 1755714298 | 0 | 0 | 0 | 0 | 0 |
| 1755713395 | 0 | 0 | 0 | 0 | 0 |
| 1755712492 | 0 | 0 | 0 | 0 | 0 |
| 1755711589 | 0 | 0 | 0 | 0 | 0 |
| 1755710686 | 0 | 0 | 0 | 0 | 0 |
| 1755709783 | 0 | 0 | 0 | 0 | 0 |
| 1755708879 | 0 | 0 | 0 | 0 | 0 |
| 1755707976 | 0 | 0 | 0 | 0 | 0 |
| 1755707073 | 0 | 0 | 0 | 0 | 0 |
| 1755706171 | 0 | 0 | 0 | 0 | 0 |
| 1755705268 | 0 | 0 | 0 | 0 | 0 |
| 1755704365 | 0 | 0 | 0 | 0 | 0 |
| 1755703461 | 0 | 0 | 0 | 0 | 0 |
| 1755702559 | 0 | 0 | 0 | 0 | 0 |
| 1755701656 | 0 | 0 | 0 | 0 | 0 |
| 1755700752 | 0 | 0 | 0 | 0 | 0 |
| 1755699849 | 0 | 0 | 0 | 0 | 0 |
| 1755698947 | 0 | 0 | 0 | 0 | 0 |
| 1755698915 | 0 | 0 | 0 | 0 | 0 |
| 1755698900 | 0 | 0 | 0 | 0 | 0 |
| 1755698883 | 0 | 0 | 0 | 0 | 0 |
| 1755698869 | 0 | 0 | 0 | 0 | 0 |
| 1755698853 | 0 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)