This is the latest recevied telemetry packets stored in our database for station/object E71AR-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762545777 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1762544874 | 3.6 VDC | 0 | 0 | 0 | 0 |
| 1762543971 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1762543068 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1762543035 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1762542990 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1762542975 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1762542919 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1762542904 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1762542884 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1762542868 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1762542805 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1762542790 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1762542773 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1762542690 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1762542671 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1762542647 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1762542524 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1762542490 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1762542460 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1762542376 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1762542177 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1762541274 | 3.63 VDC | 0 | 0 | 0 | 0 |
| 1762541251 | 3.63 VDC | 0 | 0 | 0 | 0 |
| 1762541237 | 3.63 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)