This is the latest recevied telemetry packets stored in our database for station/object OK2ILA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1767260645 | 1.7 C | 8065 | 0 | 0 | 0 |
| 1767259742 | 1.8 C | 8056 | 0 | 0 | 0 |
| 1767258839 | 1.8 C | 8070 | 0 | 0 | 0 |
| 1767257936 | 1.9 C | 8072 | 0 | 0 | 0 |
| 1767257033 | 1.9 C | 8052 | 0 | 0 | 0 |
| 1767256130 | 2 C | 8072 | 0 | 0 | 0 |
| 1767255227 | 2.1 C | 8080 | 0 | 0 | 0 |
| 1767253421 | 2.7 C | 8066 | 0 | 0 | 0 |
| 1767252518 | 3.5 C | 8077 | 0 | 0 | 0 |
| 1767251615 | 5.1 C | 8060 | 0 | 0 | 0 |
| 1767250589 | 7.1 C | 8076 | 0 | 0 | 0 |
| 1767250574 | 7.1 C | 8074 | 0 | 0 | 0 |
| 1767250524 | 6.2 C | 8074 | 0 | 0 | 0 |
| 1767250507 | 6.2 C | 8077 | 0 | 0 | 0 |
| 1767250490 | 5.5 C | 8065 | 0 | 0 | 0 |
| 1767250475 | 5.5 C | 8059 | 0 | 0 | 0 |
| 1767250459 | 5.5 C | 8067 | 0 | 0 | 0 |
| 1767250427 | 5 C | 8071 | 0 | 0 | 0 |
| 1767250407 | 5 C | 8078 | 0 | 0 | 0 |
| 1767250340 | 5 C | 8083 | 0 | 0 | 0 |
| 1767249794 | 6.4 C | 8047 | 0 | 0 | 0 |
| 1767249579 | 4.9 C | 8088 | 0 | 0 | 0 |
| 1767249537 | 4.9 C | 8086 | 0 | 0 | 0 |
| 1767249514 | 4.1 C | 8098 | 0 | 0 | 0 |
| 1767249448 | 3.5 C | 8104 | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)