This is the latest recevied telemetry packets stored in our database for station/object OK2ILA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1767970954 | 2.2 C | 8023 | 0 | 0 | 0 |
| 1767970938 | 2.2 C | 8021 | 0 | 0 | 0 |
| 1767970901 | 1.4 C | 8017 | 0 | 0 | 0 |
| 1767970877 | 1.4 C | 8021 | 0 | 0 | 0 |
| 1767970861 | 1.4 C | 8016 | 0 | 0 | 0 |
| 1767970845 | 0.7 C | 8011 | 0 | 0 | 0 |
| 1767970829 | 0.7 C | 8009 | 0 | 0 | 0 |
| 1767970813 | 0.7 C | 8003 | 0 | 0 | 0 |
| 1767970784 | 0.3 C | 8004 | 0 | 0 | 0 |
| 1767970758 | 0.3 C | 8006 | 0 | 0 | 0 |
| 1767969207 | 3.2 C | 8023 | 0 | 0 | 0 |
| 1767968303 | 6.2 C | 8011 | 0 | 0 | 0 |
| 1767968267 | 5.4 C | 8021 | 0 | 0 | 0 |
| 1767968265 | 5.4 C | 8015 | 0 | 0 | 0 |
| 1767968249 | 5.4 C | 8021 | 0 | 0 | 0 |
| 1767968219 | 4.5 C | 8018 | 0 | 0 | 0 |
| 1767968180 | 4.5 C | 8024 | 0 | 0 | 0 |
| 1767968164 | 3.6 C | 8020 | 0 | 0 | 0 |
| 1767968148 | 3.6 C | 8015 | 0 | 0 | 0 |
| 1767968132 | 3.6 C | 8017 | 0 | 0 | 0 |
| 1767968122 | 3.6 C | 8018 | 0 | 0 | 0 |
| 1767968043 | 1.8 C | 8016 | 0 | 0 | 0 |
| 1767968027 | 1.8 C | 8014 | 0 | 0 | 0 |
| 1767968008 | 1.8 C | 8015 | 0 | 0 | 0 |
| 1767967992 | 1.8 C | 8014 | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)