This is the latest recevied telemetry packets stored in our database for station/object EA1FBU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1773208768 | 4.38 VDC | 2.06 VDC | 0 | 0 | 0 |
| 1773207868 | 4.38 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1773206968 | 4.37 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1773206067 | 4.36 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1773205167 | 4.36 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1773204267 | 4.36 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1773203367 | 4.36 VDC | 1.22 VDC | 0 | 0 | 0 |
| 1773202467 | 4.36 VDC | 2.08 VDC | 0 | 0 | 0 |
| 1773201567 | 4.36 VDC | 2.08 VDC | 0 | 0 | 0 |
| 1773200667 | 4.37 VDC | 1.56 VDC | 0 | 0 | 0 |
| 1773199767 | 4.36 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1773198866 | 4.37 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1773197966 | 4.36 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1773197066 | 4.36 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1773196166 | 4.36 VDC | 2.06 VDC | 0 | 0 | 0 |
| 1773195266 | 4.36 VDC | 1.32 VDC | 0 | 0 | 0 |
| 1773194366 | 4.37 VDC | 1.92 VDC | 0 | 0 | 0 |
| 1773193466 | 4.36 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1773192566 | 4.37 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1773191666 | 4.36 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1773190766 | 4.37 VDC | 1.84 VDC | 0 | 0 | 0 |
| 1773189865 | 4.39 VDC | 1.94 VDC | 0 | 0 | 0 |
| 1773188965 | 4.39 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1773188065 | 4.39 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1773187165 | 4.37 VDC | 1.46 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)