This is the latest recevied telemetry packets stored in our database for station/object IK2EXH-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1752032129 | 104 Pkt/10m | 68 Pkt/10m | 3.43 Volt | 0 | 0 |
| 1752028585 | 101 Pkt/10m | 67 Pkt/10m | 3.45 Volt | 0 | 0 |
| 1752025041 | 121 Pkt/10m | 60 Pkt/10m | 3.47 Volt | 0 | 0 |
| 1752021497 | 136 Pkt/10m | 65 Pkt/10m | 3.53 Volt | 0 | 0 |
| 1752017952 | 129 Pkt/10m | 63 Pkt/10m | 3.53 Volt | 0 | 0 |
| 1752014407 | 101 Pkt/10m | 52 Pkt/10m | 3.57 Volt | 0 | 0 |
| 1752010863 | 89 Pkt/10m | 66 Pkt/10m | 3.59 Volt | 0 | 0 |
| 1752007319 | 95 Pkt/10m | 50 Pkt/10m | 3.57 Volt | 0 | 0 |
| 1752003775 | 0 Pkt/10m | 0 Pkt/10m | 3.63 Volt | 0 | 0 |
| 1752003476 | 81 Pkt/10m | 44 Pkt/10m | 3.59 Volt | 0 | 0 |
| 1751998097 | 154 Pkt/10m | 75 Pkt/10m | 3.65 Volt | 0 | 0 |
| 1751994554 | 126 Pkt/10m | 91 Pkt/10m | 3.68 Volt | 0 | 0 |
| 1751987467 | 144 Pkt/10m | 67 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1751980380 | 109 Pkt/10m | 84 Pkt/10m | 3.94 Volt | 0 | 0 |
| 1751976836 | 94 Pkt/10m | 60 Pkt/10m | 4.55 Volt | 0 | 0 |
| 1751969749 | 126 Pkt/10m | 87 Pkt/10m | 4.41 Volt | 0 | 0 |
| 1751959118 | 149 Pkt/10m | 66 Pkt/10m | 3.67 Volt | 0 | 0 |
| 1751951398 | 154 Pkt/10m | 59 Pkt/10m | 3.51 Volt | 0 | 0 |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)