This is the latest recevied telemetry packets stored in our database for station/object YO5OMT-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1747652681 | 190 | 0 | 0 | 0 | 0 |
| 1747651781 | 190 | 0 | 0 | 0 | 0 |
| 1747650880 | 190 | 0 | 0 | 0 | 0 |
| 1747649980 | 190 | 0 | 0 | 0 | 0 |
| 1747649080 | 190 | 0 | 0 | 0 | 0 |
| 1747648180 | 190 | 0 | 0 | 0 | 0 |
| 1747647280 | 191 | 0 | 0 | 0 | 0 |
| 1747646379 | 190 | 0 | 0 | 0 | 0 |
| 1747645479 | 191 | 0 | 0 | 0 | 0 |
| 1747644579 | 190 | 0 | 0 | 0 | 0 |
| 1747643679 | 190 | 0 | 0 | 0 | 0 |
| 1747642779 | 190 | 0 | 0 | 0 | 0 |
| 1747641878 | 190 | 0 | 0 | 0 | 0 |
| 1747640978 | 190 | 0 | 0 | 0 | 0 |
| 1747640078 | 191 | 0 | 0 | 0 | 0 |
| 1747639178 | 190 | 0 | 0 | 0 | 0 |
| 1747638278 | 190 | 0 | 0 | 0 | 0 |
| 1747637377 | 190 | 0 | 0 | 0 | 0 |
| 1747636477 | 190 | 0 | 0 | 0 | 0 |
| 1747635577 | 191 | 0 | 0 | 0 | 0 |
| 1747634677 | 191 | 0 | 0 | 0 | 0 |
| 1747633777 | 190 | 0 | 0 | 0 | 0 |
| 1747632876 | 191 | 0 | 0 | 0 | 0 |
| 1747631977 | 191 | 0 | 0 | 0 | 0 |
| 1747631076 | 191 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)