This is the latest recevied telemetry packets stored in our database for station/object SP2MG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788988476 | 285 Count | 34 Count | 34 Count | 4.31 VDC | 0.14 VDC |
| 1788986670 | 283 Count | 34 Count | 34 Count | 4.35 VDC | 0.14 VDC |
| 1788984864 | 281 Count | 34 Count | 34 Count | 4.26 VDC | 0.14 VDC |
| 1788983058 | 279 Count | 34 Count | 34 Count | 4.36 VDC | 0.14 VDC |
| 1788981253 | 277 Count | 34 Count | 34 Count | 4.27 VDC | 0.14 VDC |
| 1788979447 | 275 Count | 34 Count | 34 Count | 4.38 VDC | 0.14 VDC |
| 1788977855 | 274 Count | 34 Count | 34 Count | 4.22 VDC | 0.14 VDC |
| 1788976049 | 272 Count | 34 Count | 34 Count | 4.34 VDC | 0.14 VDC |
| 1788956246 | 250 Count | 34 Count | 34 Count | 4.27 VDC | 0.14 VDC |
| 1788954440 | 248 Count | 34 Count | 34 Count | 4.23 VDC | 0.14 VDC |
| 1788954163 | 247 Count | 34 Count | 34 Count | 4.36 VDC | 0.14 VDC |
| 1788952357 | 245 Count | 34 Count | 34 Count | 4.32 VDC | 0.14 VDC |
| 1788951585 | 244 Count | 34 Count | 34 Count | 4.38 VDC | 0.14 VDC |
| 1788949779 | 242 Count | 34 Count | 34 Count | 4.29 VDC | 0.14 VDC |
| 1788947973 | 240 Count | 34 Count | 34 Count | 4.36 VDC | 0.14 VDC |
| 1788946167 | 238 Count | 34 Count | 34 Count | 4.39 VDC | 0.14 VDC |
| 1788944361 | 236 Count | 34 Count | 34 Count | 4.36 VDC | 0.14 VDC |
| 1788942555 | 234 Count | 34 Count | 34 Count | 4.35 VDC | 0.14 VDC |
| 1788940750 | 232 Count | 34 Count | 34 Count | 4.27 VDC | 0.14 VDC |
| 1788938944 | 230 Count | 34 Count | 34 Count | 4.22 VDC | 0.14 VDC |
| 1788938660 | 229 Count | 34 Count | 34 Count | 4.33 VDC | 0.14 VDC |
| 1788936854 | 227 Count | 34 Count | 34 Count | 4.22 VDC | 0.14 VDC |
| 1788934182 | 224 Count | 34 Count | 34 Count | 4.28 VDC | 0.14 VDC |
| 1788932376 | 222 Count | 34 Count | 34 Count | 4.31 VDC | 0.14 VDC |
| 1788930687 | 220 Count | 34 Count | 34 Count | 4.21 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)