This is the latest recevied telemetry packets stored in our database for station/object SP7THR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
---|---|---|---|---|---|
1751409229 | 0 Count | 897 Count | 0 Count | 0 VDC | 0 VDC |
1751408029 | 0 Count | 893 Count | 0 Count | 0 VDC | 0 VDC |
1751406829 | 0 Count | 889 Count | 0 Count | 0 VDC | 0 VDC |
1751405629 | 0 Count | 886 Count | 0 Count | 0 VDC | 0 VDC |
1751404429 | 0 Count | 883 Count | 0 Count | 0 VDC | 0 VDC |
1751403233 | 0 Count | 866 Count | 0 Count | 0 VDC | 0 VDC |
1751402033 | 0 Count | 856 Count | 0 Count | 0 VDC | 0 VDC |
1751400833 | 0 Count | 855 Count | 0 Count | 0 VDC | 0 VDC |
1751399633 | 0 Count | 854 Count | 0 Count | 0 VDC | 0 VDC |
1751398433 | 0 Count | 853 Count | 0 Count | 0 VDC | 0 VDC |
1751397233 | 0 Count | 852 Count | 0 Count | 0 VDC | 0 VDC |
1751396033 | 0 Count | 838 Count | 0 Count | 0 VDC | 0 VDC |
1751394833 | 0 Count | 838 Count | 0 Count | 0 VDC | 0 VDC |
1751393633 | 0 Count | 838 Count | 0 Count | 0 VDC | 0 VDC |
1751392433 | 0 Count | 838 Count | 0 Count | 0 VDC | 0 VDC |
1751391232 | 0 Count | 838 Count | 0 Count | 0 VDC | 0 VDC |
1751390032 | 0 Count | 838 Count | 0 Count | 0 VDC | 0 VDC |
1751388832 | 0 Count | 838 Count | 0 Count | 0 VDC | 0 VDC |
1751387632 | 0 Count | 838 Count | 0 Count | 0 VDC | 0 VDC |
1751386432 | 0 Count | 838 Count | 0 Count | 0 VDC | 0 VDC |
1751385232 | 0 Count | 838 Count | 0 Count | 0 VDC | 0 VDC |
1751384032 | 0 Count | 838 Count | 0 Count | 0 VDC | 0 VDC |
1751382830 | 0 Count | 838 Count | 0 Count | 0 VDC | 0 VDC |
1751381633 | 0 Count | 838 Count | 0 Count | 0 VDC | 0 VDC |
1751380433 | 0 Count | 838 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)