This is the latest recevied telemetry packets stored in our database for station/object SP2BYD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789220646 | 27 Count | 288 Count | 0 Count | 4.2 VDC | 6 VDC |
| 1789220346 | 26 Count | 270 Count | 0 Count | 4.2 VDC | 6 VDC |
| 1789220047 | 25 Count | 267 Count | 0 Count | 4.2 VDC | 6.02 VDC |
| 1789219747 | 24 Count | 253 Count | 0 Count | 4.2 VDC | 6.02 VDC |
| 1789219447 | 23 Count | 243 Count | 0 Count | 4.2 VDC | 6 VDC |
| 1789219146 | 22 Count | 236 Count | 0 Count | 4.2 VDC | 6 VDC |
| 1789218846 | 21 Count | 216 Count | 0 Count | 4.2 VDC | 6 VDC |
| 1789218547 | 20 Count | 206 Count | 0 Count | 4.2 VDC | 6 VDC |
| 1789218247 | 19 Count | 199 Count | 0 Count | 4.2 VDC | 6 VDC |
| 1789217947 | 18 Count | 189 Count | 0 Count | 4.2 VDC | 6 VDC |
| 1789217646 | 17 Count | 173 Count | 0 Count | 4.2 VDC | 6 VDC |
| 1789217347 | 16 Count | 159 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1789217047 | 15 Count | 143 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1789216746 | 14 Count | 127 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1789216448 | 13 Count | 124 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1789216147 | 12 Count | 108 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1789215847 | 11 Count | 96 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1789215548 | 10 Count | 79 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1789215248 | 9 Count | 71 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1789214948 | 8 Count | 65 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1789214647 | 7 Count | 65 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1789214347 | 6 Count | 54 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1789214047 | 5 Count | 51 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1789213747 | 4 Count | 47 Count | 0 Count | 4.22 VDC | 6 VDC |
| 1789213447 | 3 Count | 42 Count | 0 Count | 4.21 VDC | 6 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)