This is the latest recevied telemetry packets stored in our database for station/object SP2MG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1751674986 | 204 Count | 948 Count | 24 Count | 4.33 VDC | 0.14 VDC |
| 1751673180 | 202 Count | 933 Count | 24 Count | 4.28 VDC | 0.14 VDC |
| 1751671374 | 200 Count | 926 Count | 24 Count | 4.33 VDC | 0.14 VDC |
| 1751669568 | 198 Count | 922 Count | 24 Count | 4.28 VDC | 0.14 VDC |
| 1751667763 | 196 Count | 915 Count | 24 Count | 4.28 VDC | 0.14 VDC |
| 1751665957 | 194 Count | 908 Count | 24 Count | 4.26 VDC | 0.14 VDC |
| 1751664151 | 192 Count | 901 Count | 24 Count | 4.33 VDC | 0.14 VDC |
| 1751662345 | 190 Count | 870 Count | 24 Count | 4.26 VDC | 0.14 VDC |
| 1751660613 | 188 Count | 864 Count | 24 Count | 4.3 VDC | 0.14 VDC |
| 1751658807 | 186 Count | 857 Count | 24 Count | 4.24 VDC | 0.14 VDC |
| 1751657001 | 184 Count | 850 Count | 24 Count | 4.31 VDC | 0.14 VDC |
| 1751655195 | 182 Count | 844 Count | 24 Count | 4.26 VDC | 0.14 VDC |
| 1751653389 | 180 Count | 837 Count | 24 Count | 4.27 VDC | 0.14 VDC |
| 1751651583 | 178 Count | 825 Count | 24 Count | 4.32 VDC | 0.14 VDC |
| 1751649777 | 176 Count | 818 Count | 24 Count | 4.29 VDC | 0.14 VDC |
| 1751647972 | 174 Count | 811 Count | 24 Count | 4.25 VDC | 0.14 VDC |
| 1751646167 | 172 Count | 804 Count | 24 Count | 4.33 VDC | 0.14 VDC |
| 1751644361 | 170 Count | 766 Count | 24 Count | 4.3 VDC | 0.14 VDC |
| 1751642556 | 168 Count | 757 Count | 24 Count | 4.23 VDC | 0.14 VDC |
| 1751640749 | 166 Count | 743 Count | 24 Count | 4.34 VDC | 0.14 VDC |
| 1751639012 | 164 Count | 736 Count | 24 Count | 4.22 VDC | 0.14 VDC |
| 1751637206 | 162 Count | 727 Count | 24 Count | 4.27 VDC | 0.14 VDC |
| 1751633594 | 158 Count | 712 Count | 24 Count | 4.3 VDC | 0.14 VDC |
| 1751631788 | 156 Count | 704 Count | 24 Count | 4.27 VDC | 0.14 VDC |
| 1751629982 | 154 Count | 693 Count | 24 Count | 4.28 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)