This is the latest recevied telemetry packets stored in our database for station/object SP2MG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1751574796 | 91 Count | 374 Count | 23 Count | 4.35 VDC | 0.14 VDC |
| 1751572990 | 89 Count | 364 Count | 23 Count | 4.23 VDC | 0.14 VDC |
| 1751571256 | 87 Count | 358 Count | 23 Count | 4.3 VDC | 0.14 VDC |
| 1751569450 | 81 Count | 342 Count | 19 Count | 4.33 VDC | 0.14 VDC |
| 1751567644 | 64 Count | 308 Count | 4 Count | 4.28 VDC | 0.14 VDC |
| 1751565838 | 62 Count | 299 Count | 4 Count | 4.33 VDC | 0.14 VDC |
| 1751564033 | 60 Count | 287 Count | 4 Count | 4.27 VDC | 0.14 VDC |
| 1751562227 | 58 Count | 279 Count | 4 Count | 4.28 VDC | 0.14 VDC |
| 1751560421 | 55 Count | 269 Count | 3 Count | 4.3 VDC | 0.14 VDC |
| 1751558615 | 52 Count | 259 Count | 2 Count | 4.26 VDC | 0.14 VDC |
| 1751556809 | 50 Count | 250 Count | 2 Count | 4.33 VDC | 0.14 VDC |
| 1751555003 | 48 Count | 242 Count | 2 Count | 4.29 VDC | 0.14 VDC |
| 1751553198 | 46 Count | 233 Count | 2 Count | 4.26 VDC | 0.14 VDC |
| 1751551392 | 44 Count | 223 Count | 2 Count | 4.23 VDC | 0.14 VDC |
| 1751549655 | 42 Count | 217 Count | 2 Count | 4.25 VDC | 0.14 VDC |
| 1751547849 | 40 Count | 212 Count | 2 Count | 4.26 VDC | 0.14 VDC |
| 1751546043 | 37 Count | 198 Count | 1 Count | 4.29 VDC | 0.14 VDC |
| 1751544237 | 35 Count | 187 Count | 1 Count | 4.28 VDC | 0.14 VDC |
| 1751542431 | 33 Count | 162 Count | 1 Count | 4.28 VDC | 0.14 VDC |
| 1751540626 | 31 Count | 150 Count | 1 Count | 4.23 VDC | 0.14 VDC |
| 1751538820 | 29 Count | 140 Count | 1 Count | 4.25 VDC | 0.14 VDC |
| 1751537014 | 26 Count | 127 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1751535208 | 24 Count | 114 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1751533403 | 22 Count | 98 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1751531596 | 20 Count | 90 Count | 0 Count | 4.25 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)