This is the latest recevied telemetry packets stored in our database for station/object DL3ED-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1783345829 | 3.36 VDC | 29.4 C | 39.3 % | 1021.38 hPa | 0 |
| 1783345780 | 3.36 VDC | 29.4 C | 39.06 % | 1021.25 hPa | 0 |
| 1783345465 | 3.36 VDC | 29.4 C | 38.71 % | 1018.63 hPa | 0 |
| 1783345435 | 3.36 VDC | 29.4 C | 38.71 % | 1018.75 hPa | 0 |
| 1783345296 | 3.36 VDC | 29.4 C | 38.5 % | 1014.5 hPa | 0 |
| 1783345241 | 3.36 VDC | 29.4 C | 38.41 % | 1011.13 hPa | 0 |
| 1783344836 | 3.35 VDC | 29.4 C | 38.11 % | 1011.75 hPa | 0 |
| 1783344787 | 3.35 VDC | 29.4 C | 38.12 % | 1011.63 hPa | 0 |
| 1783344461 | 3.35 VDC | 29.3 C | 38.1 % | 1011.63 hPa | 0 |
| 1783344400 | 3.35 VDC | 29.3 C | 38.17 % | 1011.75 hPa | 0 |
| 1783344000 | 3.35 VDC | 29.3 C | 37.96 % | 1011.63 hPa | 0 |
| 1783343957 | 3.34 VDC | 29.3 C | 38.12 % | 1011.63 hPa | 0 |
| 1783343681 | 3.34 VDC | 29.2 C | 38.38 % | 1011.63 hPa | 0 |
| 1783342778 | 3.34 VDC | 29.2 C | 39.2 % | 1012.38 hPa | 0 |
| 1783342506 | 3.34 VDC | 29.1 C | 38.95 % | 1012.5 hPa | 0 |
| 1783341474 | 3.32 VDC | 28.7 C | 40.12 % | 1013.63 hPa | 0 |
| 1783341344 | 3.31 VDC | 28.7 C | 40.37 % | 1013.88 hPa | 0 |
| 1783340775 | 3.3 VDC | 28.5 C | 40.19 % | 1013.88 hPa | 0 |
| 1783340754 | 3.3 VDC | 28.5 C | 40.19 % | 1013.88 hPa | 0 |
| 1783340713 | 3.3 VDC | 28.5 C | 39.76 % | 1014.25 hPa | 0 |
| 1783340696 | 3.3 VDC | 28.5 C | 39.76 % | 1014.38 hPa | 0 |
| 1783340661 | 3.3 VDC | 28.5 C | 40.22 % | 1014.63 hPa | 0 |
| 1783340276 | 3.29 VDC | 28.5 C | 39.9 % | 1013.38 hPa | 0 |
| 1783340219 | 3.29 VDC | 28.5 C | 40.01 % | 1013.5 hPa | 0 |
| 1783339543 | 3.27 VDC | 28.3 C | 40.18 % | 1017 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)