This is the latest recevied telemetry packets stored in our database for station/object SP2BYD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1751606465 | 172 Count | 753 Count | 64 Count | 4.2 VDC | 4.4 VDC |
| 1751605865 | 169 Count | 751 Count | 63 Count | 4.2 VDC | 4.4 VDC |
| 1751605265 | 166 Count | 747 Count | 62 Count | 4.2 VDC | 4.4 VDC |
| 1751604665 | 163 Count | 744 Count | 61 Count | 4.19 VDC | 4.38 VDC |
| 1751604065 | 158 Count | 737 Count | 58 Count | 4.19 VDC | 4.38 VDC |
| 1751603466 | 155 Count | 731 Count | 57 Count | 4.19 VDC | 4.38 VDC |
| 1751602867 | 152 Count | 725 Count | 56 Count | 4.19 VDC | 4.38 VDC |
| 1751602266 | 149 Count | 724 Count | 55 Count | 4.18 VDC | 4.38 VDC |
| 1751601667 | 145 Count | 721 Count | 53 Count | 4.18 VDC | 4.38 VDC |
| 1751601067 | 143 Count | 721 Count | 53 Count | 4.18 VDC | 4.36 VDC |
| 1751600466 | 138 Count | 718 Count | 50 Count | 4.18 VDC | 4.36 VDC |
| 1751599866 | 136 Count | 718 Count | 50 Count | 4.18 VDC | 4.36 VDC |
| 1751599266 | 133 Count | 716 Count | 49 Count | 4.17 VDC | 4.36 VDC |
| 1751598666 | 129 Count | 711 Count | 47 Count | 4.17 VDC | 4.36 VDC |
| 1751598066 | 126 Count | 707 Count | 46 Count | 4.17 VDC | 4.36 VDC |
| 1751597466 | 123 Count | 705 Count | 45 Count | 4.17 VDC | 4.38 VDC |
| 1751596268 | 117 Count | 697 Count | 43 Count | 4.17 VDC | 0.6 VDC |
| 1751595668 | 113 Count | 687 Count | 41 Count | 4.17 VDC | 0 VDC |
| 1751594469 | 106 Count | 638 Count | 38 Count | 4.17 VDC | 0 VDC |
| 1751593869 | 104 Count | 622 Count | 38 Count | 4.17 VDC | 0 VDC |
| 1751593269 | 100 Count | 601 Count | 36 Count | 4.18 VDC | 0 VDC |
| 1751592669 | 97 Count | 584 Count | 35 Count | 4.18 VDC | 0 VDC |
| 1751592070 | 94 Count | 563 Count | 34 Count | 4.18 VDC | 0 VDC |
| 1751591469 | 90 Count | 545 Count | 32 Count | 4.18 VDC | 0 VDC |
| 1751590270 | 85 Count | 507 Count | 31 Count | 4.18 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)