This is the latest recevied telemetry packets stored in our database for station/object SP2BYD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1755543856 | 0 Count | 10 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1755543556 | 298 Count | 1001 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1755543256 | 297 Count | 989 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1755542956 | 296 Count | 986 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1755542656 | 295 Count | 980 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1755542356 | 294 Count | 968 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1755542057 | 293 Count | 961 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1755541757 | 292 Count | 952 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1755541456 | 291 Count | 945 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1755541157 | 290 Count | 937 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1755540857 | 289 Count | 927 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1755540557 | 288 Count | 921 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1755540257 | 287 Count | 921 Count | 0 Count | 4.21 VDC | 1.44 VDC |
| 1755539958 | 286 Count | 920 Count | 0 Count | 4.21 VDC | 4.52 VDC |
| 1755539657 | 285 Count | 917 Count | 0 Count | 4.21 VDC | 5.56 VDC |
| 1755539357 | 284 Count | 917 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1755539057 | 283 Count | 917 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1755538757 | 282 Count | 917 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1755538456 | 281 Count | 917 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1755538156 | 280 Count | 917 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1755538146 | 275 Count | 917 Count | 0 Count | 4.22 VDC | 6 VDC |
| 1755537846 | 274 Count | 917 Count | 0 Count | 4.22 VDC | 6 VDC |
| 1755537545 | 273 Count | 917 Count | 0 Count | 4.22 VDC | 6 VDC |
| 1755537245 | 272 Count | 917 Count | 0 Count | 4.22 VDC | 6 VDC |
| 1755536944 | 271 Count | 917 Count | 0 Count | 4.22 VDC | 6 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)